Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylon® N1213HL BK - PA66-GF13 - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylon® N1213HL BK:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.8 / * % ISO 294-4, 2577
ASTM Data
Mold Shrinkage, MD 0.00075 mm/mm ASTM D 955
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Yield stress 103 / - MPa ISO 527
Flexural modulus, 23°C 4480 / - MPa ISO 178
Izod notched impact strength, +23°C 3 / - kJ/m² ISO 180/1A
ASTM Data
Tensile Strength at Yield 103 / - MPa ASTM D 638
Elongation at Break 2 / - % ASTM D 638
Flexural Modulus 4480 / - MPa ASTM D 790
Flexural Strength 165 / - MPa ASTM D 790
Rockwell Hardness M 95 / - ASTM D 785
Izod Impact notched, 1/8 in 37 / - J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
Coefficient of Thermal Expansion, MD 27 E-6/K ASTM D 696
DTUL @ 264 psi 235 °C ASTM D 648
Other propertiesdry / condUnitTest Standard
Density 1230 / - kg/m³ ISO 1183
Water Absorption, 24hr 1 % ASTM D 570
Density 1230 kg/m³ ASTM D 792
Characteristics
Delivery form
Pellets, Black
Additives
Lubricants
Special Characteristics
Heat stabilized or stable to heat
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.