Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FIL-A-GEHR PLA® - PLA - Gehr GmbH

Material Data Center offers the following functions for FIL-A-GEHR PLA®:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fil-A-Gehr datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - 3D Data
Any use of this information falls under the rules of our disclaimer.
Product Texts
To determine the FIL-A-GEHR PLA® data, ISO 527 tensile test speciment were printed vertically with the following parameters: Infill 20%, TPrint 223°C, TBed 65°C, Layer thickness 0,2 mm, Outlines 3, Nozzle diameter 0,5 mm, Wall thickness 1,5 mm, Infill rectilinear, Printing speed 50 mm/s, Multiplier 100, Slicer Simplify3D
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 2.35 cm³/10min ISO 1133
Temperature 190 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3380 MPa ISO 527
Yield stress 70.4 MPa ISO 527
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 152 °C ISO 11357-1/-3
Other propertiesValueUnitTest Standard
Density 1240 kg/m³ ISO 1183
3D DataValueUnitTest Standard
Tensile modulus, upright 2900[1] MPa -
Tensile strength, upright 42[1] MPa -
1: black color
Characteristics
Processing
Additive Manufacturing
Delivery form
Monofilament
Features
Good Adhesion, Low Odor
Certifications
Contains renewable resources, Food contact
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.