Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® C 98 A - (TPU-ARES) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Mechanical properties - Thermal properties - Electrical properties - Other properties - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

DESCRIPTION
Elastollan C 98 A is a polyester based TPU

SPECIAL PROPERTIES
high tensile strength, excellent tear strength,
very good damping behavior, good rebound elasticity,
very good wear performance, good flexibility at low temperature
and resistance to hydrolysis

TYPICAL APPLICATIONS
pneumatic hoses

OTHER HINTS
predrying: 2-3h at 100-110°C (air circulating oven)
or 95-105°C (dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	180	MPa	ISO 527
Stress at 50% strain	12	MPa	ISO 527
Strain at break	>50	%	ISO 527
Charpy notched impact strength, +23°C	N	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	N	kJ/m²	ISO 179/1eA
Tensile notched impact strength, +23°C	450	kJ/m²	ISO 8256/1
Stress at 100% elongation	14	MPa	ISO 527
Stress at 300% elongation	26	MPa	ISO 527
Stress at break TPE	50	MPa	ISO 527
Strain at break TPE	>300	%	ISO 527
Compression set at 23 °C, 24h	30	%	ISO 815
Compression set at 70 °C, 24h	50	%	ISO 815
Tear strength	130	kN/m	ISO 34-1
Abrasion resistance	30	mm³	ISO 4649
Shore D hardness	50	-	ISO 7619-1

Thermal properties	Value	Unit	Test Standard
ISO Data
Glass transition temperature, 10°C/min	-24	°C	ISO 11357-1/-2
Burning Behav. at thickness h	HB	class	IEC 60695-11-10
Thickness tested	1.0	mm	-
Yellow Card available	yes	-	-
Oxygen index	22	%	ISO 4589-1/-2

Electrical properties	Value	Unit	Test Standard
ISO Data
Dissipation factor, 100Hz	310	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	680	E-4	IEC 62631-2-1
Volume resistivity	1E11	Ohm*m	IEC 62631-3-1
Surface resistivity	2E14	Ohm	IEC 62631-3-2
Electric strength	28	kV/mm	IEC 60243-1
Comparative tracking index	600	-	IEC 60112

Other properties	Value	Unit	Test Standard
Density	1220	kg/m³	ISO 1183

Diagrams

Characteristics

Processing

Profile Extrusion

Delivery form

Pellets

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other text information

Profile extrusion

Barrel temperature : 160 - 220 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.