Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ECOZEN® MT10G - Copolyester - SK Chemicals

Material Data Center offers the following functions for ECOZEN® MT10G:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ecozen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.0035 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 49 MPa ISO 527
Yield strain 5.7 % ISO 527
Stress at break 48 MPa ISO 527
Strain at break 150 % ISO 527
Flexural modulus, 23°C 1800 MPa ISO 178
Flexural strength 73 MPa ISO 178
Izod notched impact strength, +23°C 93 kJ/m² ISO 180/1A
ASTM Data
Tensile Strength at Yield 51 MPa ASTM D 638
Tensile Strength at Break 53 MPa ASTM D 638
Elongation at Yield 6.8 % ASTM D 638
Elongation at Break 200 % ASTM D 638
Flexural Modulus 1913 MPa ASTM D 790
Flexural Strength 80.4 MPa ASTM D 790
Rockwell Hardness R 119 - ASTM D 785
Izod Impact notched, 1/8 in 860 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 81 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 97 °C ISO 75-1/-2
ASTM Data
UL 94 Flame rating V-2 - UL 94
DTUL @ 66 psi 99 °C ASTM D 648
DTUL @ 264 psi 85 °C ASTM D 648
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 1 % ASTM D 1003
Light Transmittance 86 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 1270 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Special Characteristics
Heat stabilized or stable to heat, Transparent
Features
Copolymer
Chemical Resistance
General Chemical Resistance
Certifications
Contains renewable resources
Applications
IT / Business Machine, Medical
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.