Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Diakon CTG815 - PMMA - Lucite International

Material Data Center offers the following functions for Diakon CTG815:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Diakon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 2.9 g/10min ISO 1133
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 62 MPa ISO 527
Flexural modulus, 23°C 2800 MPa ISO 178
Charpy impact strength, +23°C 33 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 3.3 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 3 kJ/m² ISO 180/1A
Rockwell hardness M 76 - ISO 2039-2
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 97 °C ISO 75-1/-2
Vicat softening temperature, A 111 °C ISO 306
Vicat softening temperature, B 99 °C ISO 306
Burning behav. at thickness h HB class IEC 60695-11-10
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 1.3 % ASTM D 1003
Light Transmittance 92 % ASTM D 1003
Other propertiesValueUnitTest Standard
Water absorption 0.32 % Sim. to ISO 62
Density 1160 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding, Other Extrusion
Special Characteristics
Heat stabilized or stable to heat
Applications
Automotive
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.