Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Clyrell EC348P - PP - LyondellBasell Industries

Material Data Center offers the following functions for Clyrell EC348P:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Clyrell datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 19 cm³/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
Melt flow index, MFI 14 g/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
ASTM Data
Melt Flow Index, MFI 16 g/10min ASTM D 1238
Temperature 230 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1200 MPa ISO 527
Yield stress 28 MPa ISO 527
Yield strain 13 % ISO 527
Strain at break >50 % ISO 527
Charpy notched impact strength, +23°C 5 kJ/m² ISO 179/1eA
Ball indentation hardness 46 MPa ISO 2039-1
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 0.45 MPa 75 °C ISO 75-1/-2
Vicat softening temperature, A 128 °C ISO 306
Vicat softening temperature, B 65 °C ISO 306
ASTM Data
DTUL @ 66 psi 67.2 °C ASTM D 648
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 13 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 900 kg/m³ ISO 1183
Density 902 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Special Characteristics
Anti-static, Transparent
Features
Copolymer, Random Copolymer
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011
Applications
Sports Equipment
Regional Availability
Europe, Asia Pacific, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.