Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Armamid® PA6-1FR - PA6 - R&P Polyplastic

Material Data Center offers the following functions for Armamid® PA6-1FR:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Armamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
This material displays high mechanical, physical and electrical properties; resilience to hydrocarbons (kerosene, gasoline, diesel fuel, benzene etc.), to mineral and synthetic oils, to concentrated and weak alkali. Available in natural, white, red, beige, light-brown and light-grey dye.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 28 g/10min ISO 1133
Temperature 250 °C -
Load 2.16 kg -
Molding shrinkage, parallel 1.0 % ISO 294-4, 2577
Molding shrinkage, normal 1.0 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 80 MPa ISO 527
Strain at break 5 % ISO 527
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 216 °C ISO 11357-1/-3
Temp. of deflection under load, 0.45 MPa 185 °C ISO 75-1/-2
ASTM Data
UL 94 Flame rating V-2 - UL 94
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E13 Ohm*m IEC 62631-3-1
Electric strength 23 kV/mm IEC 60243-1
Comparative tracking index 400 - IEC 60112
Other propertiesValueUnitTest Standard
Density 1180 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 240 °C -
Mold temperature 80 °C -
Characteristics
Processing
Injection Molding
Special Characteristics
Heat stabilized or stable to heat
Chemical Resistance
Alkali Resistance, Oil Resistance
Applications
Aircraft and Aerospace, Automotive, Electrical and Electronical
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.