Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ALTECH PS A 1000/920 UV NC0001-00 - PS - MOCOM Compounds GmbH & Co. KG

Material Data Center offers the following functions for ALTECH PS A 1000/920 UV NC0001-00:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Altech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Base PolymerPolystyrene
Special Featureseasy release (demoulding),UV stabilised
Market SegmentAutomotive,electrical and electronic,Machinery
Application Areaextruded parts,injection moulded parts,exterior parts
Typical Applicationsbezels,films,profile
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 4 cm³/10min ISO 1133
Temperature 200 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3300 MPa ISO 527
Stress at break 52 MPa ISO 527
Strain at break 3.2 % ISO 527
Charpy impact strength, +23°C 10 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 1.5 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 83 °C ISO 75-1/-2
Vicat softening temperature, B 98 °C ISO 306
Burning Behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.5 mm -
Other propertiesValueUnitTest Standard
Density 1050 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding, Other Extrusion
Delivery form
Natural Color
Special Characteristics
U.V. stabilized or stable to weather
Applications
Automotive, Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, Near East/Africa
Other text information
Injection molding
Pre-Drying Conditionsin a dry air (dessiccant) dryer 60-80 °C
for 2-3 h
in an air circulating dryer 60-80 °C
for 2-3 h
Processing Injection Mouldingmelt temperature 180-260 °C
mould temperature 10-70 °C
Storagedry, protected from light
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.