Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ALFATER XL A80 2EC0000 - TPV - MOCOM Compounds GmbH & Co. KG

Material Data Center offers the following functions for ALFATER XL A80 2EC0000:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Alfater datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Base PolymerThermoplastic Vulcanisate (PP+EPDM)
Colourblack
Service Temperaturemax. range (depending on load, geometry, etc.) -40-125 °C
Special Featureselectrically conductive,reduced surface resistivity,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant
Market SegmentAutomotive,Machinery,electrical and electronic,building and construction
Application Areainjection moulded parts,extruded parts,coextrusion
Typical Applicationsfunctional components with electrical conductivity,seals,sealing lip,profile,2K components
Adhesion toPolypropylene Homopolymer,Polypropylene Copolymer,Polyethylene,Thermoplastic Vulcanisate (PP+EPDM),Thermoplastic Olefin Elastomer,Thermoplastic Elastomer general
Mechanical propertiesValueUnitTest Standard
ISO Data
Tear strength 40 kN/m ISO 34-1
Shore A hardness 80 - ISO 7619-1
Other propertiesValueUnitTest Standard
Density 1000 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding, Profile Extrusion, Other Extrusion
Delivery form
Black
Special Characteristics
Increased electrical conductivity, U.V. stabilized or stable to weather
Chemical Resistance
General Chemical Resistance, Hydrolytically Stable, Ozone Resistance
Applications
Automotive, Building Construction, Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, Near East/Africa
Other text information
Injection molding
Pre-Drying Conditionsin a dry air (dessiccant) dryer 70-80 °C
for 2-4 h
max. moisture content <0,10 %
Processing Injection Mouldingmelt temperature 195-230 °C
mould temperature 10-60 °C
injection speed high
back pressure (hydraulic) >5 bar
holding pressure 50-70% of injection pressure
Processing Extrusionmelt temperature 200-240 °C
die temperature 200-230 °C
Storagedry, protected from light
not above 30°C
tightly sealed
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.