Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ALCOM LD2 PC 1000 17150 UV GY2240-08 - PC - MOCOM Compounds GmbH & Co. KG

Material Data Center offers the following functions for ALCOM LD2 PC 1000 17150 UV GY2240-08:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Alcom datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Base PolymerPolycarbonate
Special Featuresimpact modified,UV stabilised,contains recycled material,light scattering
Market Segmentelectrical and electronic,Lighting,various
Application Areaexterior parts,fixtures / fittings,electrical components
Typical Applicationshousings,lamps,sockets,various
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 15 cm³/10min ISO 1133
Temperature 300 °C -
Load 1.2 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2300 MPa ISO 527
Yield stress 63 MPa ISO 527
Yield strain 6 % ISO 527
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 75 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 128 °C ISO 75-1/-2
Vicat softening temperature, B 146 °C ISO 306
Other propertiesValueUnitTest Standard
Density 1190 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Special Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Transparent
Certifications
Recycled Resin Content
Applications
Electrical and Electronical
Other text information
Injection molding
Pre-Drying Conditions120 °C in a dry air (dessiccant) dryer
for 2-4 h
120 °C in an air circulating dryer
for 4-12 h
max. moisture content <0,02 %
Processing Injection Mouldingmelt temperature 270-310 °C
mould temperature 80-110 °C
Storagedry, protected from light
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.