Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Adsyl 7423 XCP - PP - LyondellBasell Industries

Material Data Center offers the following functions for Adsyl 7423 XCP:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Adsyl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 5.5 g/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
ASTM Data
Melt Flow Index, MFI 5.5 g/10min ASTM D 1238
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 24 MPa ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 700 MPa ISO 178
ASTM Data
Tensile Strength at Yield 24 MPa ASTM D 638
Flexural Modulus 750 MPa ASTM D 790
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 130 °C ISO 11357-1/-3
Temp. of deflection under load, 0.45 MPa 67 °C ISO 75-1/-2
ASTM Data
Melting Temperature 130 °C ASTM D 3418
Optical propertiesValueUnitTest Standard
ASTM Data
Gloss 91 - ASTM D 2457
Haze 0.9 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 900 kg/m³ ISO 1183
Density 900 kg/m³ ASTM D 792
Film PropertiesValueUnitTest Standard
ISO Data
Tensile Modulus, parallel 340 MPa ISO 527-3
Tensile Modulus, normal 340 MPa ISO 527-3
Stress at yield, parallel 17 MPa ISO 527-3
Stress at yield, normal 16 MPa ISO 527-3
Strain at yield, parallel 15 % ISO 527-3
Strain at yield, normal 14 % ISO 527-3
Stress at break, parallel 25 MPa ISO 527-3
Stress at break, normal 35 MPa ISO 527-3
Maximum strain, parallel 650 % ISO 527-3
Maximum strain, normal 850 % ISO 527-3
Type of extrusion cast - -
Thickness of specimen 0.05 mm -
Characteristics
Processing
Film Extrusion
Additives
Antiblocking agent
Features
Heat Sealable
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR
Applications
Packaging
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.