Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Adstif HA612M - PP - LyondellBasell Industries

Material Data Center offers the following functions for Adstif HA612M:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Adstif datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 7 g/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1900 MPa ISO 527
Yield stress 38 MPa ISO 527
Yield strain 7 % ISO 527
Strain at break 20 % ISO 527
Shore D hardness 72 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 0.45 MPa 106 °C ISO 75-1/-2
Vicat softening temperature, A 158 °C ISO 306
Optical propertiesValueUnitTest Standard
ASTM Data
Gloss 69 - ASTM D 2457
Haze 5 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 900 kg/m³ ISO 1183
Film PropertiesValueUnitTest Standard
ASTM Data
Tensile Strength at Yield, MD 22 MPa ASTM D 882
Tensile Strength at Break, MD 37 MPa ASTM D 882
Elongation at Break, MD 860 % ASTM D 882
Type of extrusion cast - -
Thickness of specimen 0.05 mm -
Characteristics
Processing
Film Extrusion
Special Characteristics
Heat stabilized or stable to heat, Transparent
Features
High Crystallinity, Homopolymer
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR
Applications
Packaging
Regional Availability
Europe, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.