Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Adflex C 200 F - TPO - LyondellBasell Industries

Material Data Center offers the following functions for Adflex C 200 F:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Adflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 6 g/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 8 MPa ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 220 MPa ISO 178
Izod notched impact strength, +23°C N kJ/m² ISO 180/1A
Izod notched impact strength 65 kJ/m² ISO 180/1A
Temperature -20 °C -
Shore D hardness 41 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 0.45 MPa 50 °C ISO 75-1/-2
Vicat softening temperature, A 89 °C ISO 306
Optical propertiesValueUnitTest Standard
ASTM Data
Gloss 47 - ASTM D 2457
Haze 8 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 890 kg/m³ ISO 1183
Film PropertiesValueUnitTest Standard
ISO Data
Tensile Modulus, parallel 125 MPa ISO 527-3
Tensile Modulus, normal 110 MPa ISO 527-3
Stress at yield, parallel 8 MPa ISO 527-3
Stress at yield, normal 8 MPa ISO 527-3
Strain at yield, parallel 26 % ISO 527-3
Strain at yield, normal 23 % ISO 527-3
Stress at break, parallel 30 MPa ISO 527-3
Stress at break, normal 24 MPa ISO 527-3
Maximum strain, parallel 990 % ISO 527-3
Maximum strain, normal 890 % ISO 527-3
Type of extrusion cast - -
Thickness of specimen 0.05 mm -
Characteristics
Processing
Film Extrusion, Other Extrusion, Coating, Thermoforming
Special Characteristics
Transparent
Features
Soft Feel
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR
Applications
Packaging
Regional Availability
Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.